畅鑫二手滚筒烘干机,防火滚筒烘干机设计
一般情况下固定在90，L升降板垂直固定，周长可按30°角焊接，90°，90°，通过，提升板在不同的空间高度有较大的分配区域，从而改变热交换率。请注意，烘干。如果废气温度可以设置几组X形中间提升板。
In general, the lifting plate is fixed at 90, and the L lifting plate is fixed vertically. The circumference can be welded at the Angle of 30°, 90°, 90°. Through, the lifting plate has a larger distribution area at different space heights, so as to change the heat exchange rate. Please pay attention to drying. If the exhaust gas temperature is higher than that, several x-shaped intermediate riser plates can be installed.
可扩展能力强，设计考虑了生产余量，即使产量小幅度增加，也无需更换设备。设备采用调心式拖轮结构，拖轮与滚圈的配合好，大大降低了磨损及动力消耗。设计的挡轮结构，大大降低了由于设备倾斜工作所带来的水平推力。抗过载能力强，筒体运行平稳，可靠性高。
The design considers the production margin, even if the output increases slightly, there is no need to replace the equipment. The equipment adopts the self-aligning tug structure, the tug and the roller are well matched, which greatly reduces the wear and power consumption. The specially designed retaining wheel structure greatly reduces the horizontal thrust caused by the tilting operation of the equipment. Strong overload resistance, stable operation of the cylinder, high reliability.
也有用间接加热的方法，即热量由金属壁发送给被干燥原材料，如外加热式的转筒式干燥器。
Indirect heating is also used, that is, heat is sent from the metal wall to the raw material to be dried, such as externally heated drum dryers.
